How to Find Router IP Address on Mac OS

Router IP Address on Mac: Are you looking forward to upgrading the software of your router then you need to secure your wireless network with a strong password so you must know the exact IP address of the router to access various settings. The default IP address of the routers or and in some cases you might have changed the default IP address during the installation. And if you do not remember the IP address you have the two possible methods to get back your IP address of the router. The router will also be having the IP address, and we must know the username and password. And you must be aware of the login credentials to change the router settings.

Router IP Address on Mac

Most of the router manufacturers use the default IP address, and this information is available on the back of the router and as well as in the users manual. And the easy way to find the router IP Address is that we can move over to the website of the router manufacturer and look out for the IP Address. And the easy way to know the IP Address of a router is that we must verify the system preferences in the Operating System, i.e., OS.  In this article, you are going to learn about the Router IP Address on Mac.

Find Router IP Address on Mac

It is easy to find the Router IP Address on Mac device and hence follow the below steps to find the Router IP Address on Mac. These steps can also be useful whether your Mac is connected with an Ethernet Cable or it is a wireless connection over a Wifi Network.

  • The first thing you have to do is open your Mac device and click on the “Apple” Logo and then click on System Preferences in the Drop down list.

Router IP Address on Mac

  •  And a Window appears on the screen, and we have to choose the “Network” option.

Router IP Address on Mac

  • Now click on Wifi or Ethernet option depending on the router connection, i.e., via Wifi or Ethernet.

Router IP Address on Mac

  • There you can observe the router IP Address, for example, it is in the format of

Log in to the Router on Mac

And if you know the IP address of the router then it is easy to log into the Router. Follow the below steps to Log into the Router on Mac.

  • Open the Safari Browser or Chrome on your Mac.
  • Next, type the router IP address in the address bar and click on it.

Note: There will not be any http:// in the IP Address

  • Once you have done with the above step, you can observe the login screen. There you can enter the Username and Password.
  • Unless you change the username and password, the username will be “Admin, ” and the password will be “Password” or blank.

How to a Change the Router Settings on Mac

Once you log into the router, you will have the complete access to the settings, and you can change the settings as per your requirements.

You have the possibility to change the Wifi Password or Username to secure your password from the hackers. And apart from the above discussion, there are also many advanced settings.

Click Here: Find Router IP Address Admin Router Login Settings | Router Settings Admin: is an IP address code which gives access to the authoritative panel for your modem or router management address. Admin IP address is the most common for the home router, and the routers like Belkin and SMC are having the same type of IP address. And the most important thing is that we can configure them according to the local network preference. We can not connect the router to any network in the home because it is a private IPv4 Address. Therefore the users are suggested to use the separate addresses. All the routers can have the IP address and the router’s administrative console and configure its settings. Admin

Login to Router IP Address | Admin

  • As you router address is then you can log in using the IP Address from your browser.
  • What yo have to do is type and press enter. Make sure that the IP Address is not it is
  • After searching for the IP Address, a page will appear on the screen where you have to log into the router configuration page.
  • There you have to enter the username and password and then if you are facing any issues, then it will show the “Web page cannot load.”
  • And the fact is that there are only a few internet service providers which allow typing your name in the browser instead of the IP Address.

Restrictions while using the Admin

It is a unique Internet Protocol (IP) for personal internet connection and is a private Ipv4 network address. In this Ipv4 we cannot link to the Router outside for the personal network. Therefore there is most of the public WiFi which works on the router public IP address. And if you like to set up to routers on a common network then we need to set the routers with a different IP address. Admin

Change the IP Address

If you want to change the IP address, then follow the simple steps. Navigate to the admin console for routers specification to configure and customize the router. The admin console provides various options, and with the help of those options, we can change the address and IP settings.

How do I reach to the

By following the below steps carefully, we can easily reach out to the Admin. Check out the below data.

  • First, type in the address bar of the browser and keep in mind that don’t type the address in the search area. Next, you will get access to the administrative panel.
  • Now a prompt window will appear on the screen, and there you are asked to enter the username and password.
  • If your password is wrong, then you are supposed to reset it.
  • Hence rest your modem, and therefore you can get back the password when you log in again.
  • And the other option is that we can change the password if we don’t remember it. This can be done with reset button which is on the back of the router. Admin

Final Words

Therefore Admin is having a lot of things to know, and the configuration of the router is done with the IP number, and for the other IP settings, you need 192.168..2.1. This is all about the 1952.168.2.1 Admin and its router Login Settings.

Reach out Here: Router Login